qq飞车漂移方法(国外英语资料).doc

qq飞车漂移方法(国外英语资料) 1.: the first double double. Big float and small float. It is gone after still to trigger the first small shift, after spraying, let the drift button, triggering second small spray, double finish. The specific operation is as follows, 1. (+shift = 2. = +shift - began to drift) (always in shift, back to front) = 3. release. Then press the arrow 4. released the shift 5. release decrease, and then press the arrow 6. ~~2. later (without using speed. So dont get it) 3. super start, hold shift first, other dont press. Appears after the start, then press and hold up to the two keys, shift 4.WC/Wlink WLink spray spray off even refers to the use of W as the two spray. The double optimal (no sound two spray for optimal double). Give up arrow arrow before the spray and spray, loosen up and spray to make up the time and speed. In this case, we have to change the previous key habits, and it takes some time to master. W/A/S/D is default and cannot be changed. Now talk about the specific operation: before the double premise. The application of the W bond was added. W spray is used as the second jet. While the up arrow is not loosened. Time to master, you can make it to the best of double. Like I havent stopped. WC is the use of a N2 double jet in the middle. Operation method: is the premise of double arrow (loose) +N2+W two spray spray. I use a flash of speed, about 300. Dont believe yourself, try it. Someone will ask. 1, can +N2 still take W2 after spraying? Yes, the interval is very short. The three are connected movements, as long as you accelerate the end, you can still hear the sound of W jet. Then your WC jet will work. Another is the drift when the S does not loosen first, use the N2 after the +W jet, +W spray. The two sprays come out. Speed can reach about 345. The 5. section is generally used for double straight section [it and is a double role, is to reduce the loss of speed example: you seen the track 23], the area of video started straight start off d