截止阀(国外英语资料).doc

截止阀(国外英语资料) Globe valve medical aircraft Valve (stop valve, Globe Valve) opening and closing parts are plug shaped valve, sealing surface flat or cone, fluid along the centerline of the valve for linear motion. Stem movement in the form of (general name: dark rod), but also a lifting rod type, (general name: Ming rod) stop valve is to close the valve (valve) along the seat centerline moving valve. According to this form of valve movement, the valve seat opening change is proportional to the valve stroke. Because of the valve stem to open or close the trip is relatively short, but very reliable cut off function, and because changes in the valve seat and the valve stroke is proportional, is very suitable for flow regulation. Therefore, this type of valve is ideally suited for cutting or adjusting and throttling. Catalog Stop valve profile The working principle of stop valve The classification of the cut-off valve 1. according to the direction of the cut-off valve, divided into: 2., according to the cut-off valve stem thread position can be divided: 3. classification by use: Advantages and disadvantages 1. Advantages 2, shortcomings 3, the use of advantages Notes on structure and installation Stop valve related knowledge Brief introduction of operation cut-off valve of globe valve The working principle of stop valve The classification of the cut-off valve 1. according to the direction of the cut-off valve, divided into: 2., according to the cut-off valve stem thread position can be divided: 3. classification by use: Advantages and disadvantages 1. Advantages 2, shortcomings 3, the use of advantages Notes on structure and installation Stop valve related knowledge Stop valve operation Expand the editing of this section valve The cut-off valve is a forced seal type valve, so when the valve is closed, the valve must be applied to the pressure, to force the sealing surface is not leaking. When the medium into the valve from the bottom of the valve, the operating force requi