环氧树脂特种固化剂的研制与应用(国外英语资料).docVIP

环氧树脂特种固化剂的研制与应用(国外英语资料) Preparation and application of special curing agent for epoxy resin Liu Shougui, Tan Zhouqin, Zhang Jie Zhong Hao Chenguang Chemical Research Institute, Sichuan, Zigong 643201, China) Abstract: This paper introduces a special synthetic method and application of epoxy resin curing agent which can be used in oil, underwater and low temperature curing. Keywords: epoxy resin, curing agent, synthesis, application 1. introduction Epoxy resin products are being serialized, refined, colorless, dedicated, highly purified, green environmental protection direction, cost-effective to maximize the direction of development. The corresponding curing agent products are being scaled up, highly purified, featured, highly functional and specialized. The development of a new epoxy resin curing agent provides an excellent curing property, which is equivalent to opening up a new field of epoxy resin application in a certain field. In fact, developing a new type of epoxy curing agent is much easier than developing a new type of epoxy resin. Only with some curing defects existing in the existing curing agent, [1] can be obtained by improving the raw material variety, formula or adopting a new synthesis process route. Special curing agents are welcome to adapt to special environments (humid, underwater, outdoor, low temperature environment, etc.). With the construction of water conservancy project in China, defect repair dam, anti-corrosion treatment of underwater engineering, there is an urgent need for a capable underwater bonding curing agent; strengthening chemical factory building, old building renovation, due to various reasons, can not completely clean oil, eager to oil surface adhesive curing agent; northern winter outdoor anticorrosion construction requirements of epoxy resin curing system has good characteristics of low temperature curing. Patent [2] reported the synthesis of a Manny base curing agent which can be rapidly solidified under special conditions