缝盘机(国外英语资料).docVIP

缝盘机(国外英语资料) Sewing machine repair The connecting rod type sewing machine has many problems, often in solving a problem, this problem is solved, another problem appeared, and there is a pull of the whole body moving feeling To solve the problem, you must first understand how each part of the work works 1, the four connecting rods, respectively by 3 cams and a connecting rod, wheel control, see below, and the 4 connecting rod 1, 2, and 3 respectively control the hook line triangle swing around and up and down movement, needle displacement (moving from one to another Acupuncture Acupuncture), 4 control needle swing. 2, coordination movement. To coordinate the four parts of the movement, is related to the triangle hook line swing up and down and back and forth movement and stitches should coordinate with each other, otherwise you will appear all kinds of problems, such as breaking off, hook needle, single (double seam), elastic joints have not... 3, adjust: A, line hook, front and back movement up and down adjustments: See whether the front and back movements of the hook are suitable, such as improper adjustment of the cam position of the No. 1 lever, and the specific way to lift the screw on the cam and turn it slightly. Then try it on. But the No. 1 connecting rod the cam adjustment, 2 rod link that will also tune, also is to look at the same time hook line movement up and down, look around and see if you hit the needle sewing machine. B, the needle displacement adjustment To be continued The connecting rod type sewing machine has a lot of problems. It is often solved when a problem is solved, and another problem arises First, the four connecting rods, respectively by 3 cams and a connecting rod, wheel control, see below, and the 4 connecting rod 1, 2, and 3 respectively control the hook line triangle swing around and up and down movement, needle displacement (moving from one to another Acupuncture Acupuncture), 4 control needle swing. Two, coordination movement. To