阀门资料(国外英语资料).docVIP

阀门资料(国外英语资料) Diaphragm valve Diaphragm valve is a special form of cut-off valve, appeared in 1920s. The opening and closing parts of the utility model are a diaphragm made of soft material, and the inner cavity of the valve body is separated from the inner cavity of the valve cover and the driving component, so that the diaphragm valve is called. The opening and closing part of the diaphragm valve is a diaphragm made of soft material, and the inner cavity of the valve body is separated from the inner cavity of the valve cover. The diaphragm is actually just a clamp valve, an elastic, the diaphragm can be disturbed, connected to the compression member with studs compression, which is operated by stem movement, when compressed pieces rise diaphragm on hold, resulting in access, when compressed pieces falling, diaphragm pressure at valve weir (even for the weir type valve) or pressure at the bottom contours (even for straight), diaphragm valve suitable for switching and reducing use. The reason of diaphragm design their own special for pure medium or severe pollution, liquids, gases, corrosive or inert medium is very thick. In combination with control equipment, diaphragm valves are more likely to replace other conventional control systems, especially for solid and easily contaminated inert media. The products are mainly used in pharmaceutical, food, and water treatment industry; industrial electricity, chemical industry, electroplating industry, etc., are also used in semiconductor wafer production, the diaphragm is particularly suitable for transporting corrosive, viscous fluid, such as mud, food, medicines, fiber adhesion liquid so, because of the pipeline, diaphragm valve operating mechanism, is not exposed to the delivery of fluid, so no pollution, does not need to fill, the Department can not stem packing leakage. Diaphragm valve features are as follows: Diaphragm valve is the most prominent characteristic of the diaphragm to the lower body cavity and the upper