风管无法兰连接技术(国外英语资料).docVIP

风管无法兰连接技术(国外英语资料) The main points of making and installing technology of aluminium foil composite phenolic plate and glass magnesium composite duct without flange connection. This information comes from peoples net Release date: 21:56 September 5th View frequency: 47 Maintenance service Location: Muchuan Author: Science and technology from the Bangleni duct: Bangleni pipe / A, BLN type glass fiber composite duct without flange connection is used on type two sets of rolling wheels without flange combination machine according to the interaction between the rolling principle of glass magnesium composite duct itself two end bite into the flange (see photo), and then through the flange angle corner (see photo) and clamp hook code (flange see Figure two) will connect the wind pipe, connected with the wind pipe length method practical rectangular air between 300~2000mm tube, because the rolling machine directly on the wind pipe processing since the flange, the wind strength greatly improved, sealing strong, elegant tidy appearance, it not only replaces the traditional angle steel flange connect, simplify the process cumbersome, it is with the progress of the labor force, reduce the air pipe and the flange and its weight, easy to manufacture and installation of the construction site, the process is as follows: The wind pipe in the process, flange materials and the length of the shear angle length of 61~62mm, thickness of the plate according to the actual use and the processing methods such as the combination of the bite angle of bite reservation quantity is 30mm, snap bite reserved for 31mm to have to cut corners of the width, the advanced wind pipe itself bite processing, air duct, the flange combined machining duct two end flanges when the wind pipe length smaller than 400mm, the total free plate flange combined small frame machine with operation in wind pipe flange rolling bite, can be combined without side flange in total the machine plate briefly work table and the co