六、现实操纵题 煤矿测验内容(国外英文资料).docVIP

六、实际操作题 煤矿考试内容(国外英文资料) What is the condition of hydraulic support? Answer: (1) the parts of the stents are complete, good and reliable. (2) the piston rod and cylinder body are reliable, no damage, no serious deformation and good seal. (3) the metal structure has no effect on the serious deformation of normal use, and the weld shall not be affected by the cracks in the safe use of the stent. (4) all kinds of valves are well sealed, not liquid, oil spill, and the action is flexible and reliable. The pressure of the relief valve conforms to the prescribed number. The filter is in good condition and no abnormal sound is performed. (5) the hose and the street are intact, clean, neat, connected correctly, uncompressed, and the u-pin is intact. (6) the pump station supply pressure meets the requirements, and the liquid meets the standard. What should be noted in the maintenance and management of hydraulic support? Answer: (1) in the process of mounting and repairing, the proper tools must be used to prohibit the hard knocks. Especially the piston cylinder surface, guide sleeve, various valve parts of the piston cylinder, the cover of the cylinder, the pipe joint and the connecting thread etc. (2) hydraulic components, such as hydraulic cylinders and valves used on the brackets, are generally not allowed to be removed in the underground. (3) various hose, columns, jack and all kinds of valve parts in and out of the liquid mouth, must use the appropriate plug protection, pay attention to in the process of storage and handling plug out. (4) the storage of the stents should be noted for strengthening dust, rust and anti-freeze measures. (5) the hose shall be rolled or straightened in storage, and the bending radius shall not be less than 200 to 500mm. Rubber parts and Aaron should avoid direct sunlight, rain and snow shower, storage temperature should be kept in 15 - + 40 ℃, depositing relative humidity between 50% and 80%, it is strictly prohibited contact with acid and al