中国联塑 pvc管道安装施工方案(国外英文资料).docVIP

中国联塑 pvc管道安装施工方案(国外英文资料) Construction considerations 1, pipe installation before construction, should meet the following conditions: first, design drawings and other technical requirements is complete, correct construction scheme and construction organization has to be confirmed and implement; Second, construction materials, construction tools and equipment are ready to ensure normal construction. The construction personnel are required to carry out the construction according to the design requirements, and the approval document of the design unit must be modified when the design is modified, and the unauthorized alteration of the design should be strictly prohibited. 3, before construction, should be acceptance of the material quality, specification and quantity of products should comply with the standard of product, the product has quality inspection department certification, fittings and pipe model matching. 4, PVC -u feed water pipe and other horizontal interval between adjacent piping should not be less than the construction and maintenance requirements of slot width and set the width of the gate shaft ancillary structure requirement. The horizontal distance between the high temperature pipe and the high pressure gas pipe, such as the hot water pipe, should not be less than 1 and 5m. Drinking water pipes shall not be laid under drainage pipes and sewage pipes. The horizontal distance between the line of PVC and the outer wall of the building and the outer wall of the building should not be less than the following: it is said that the outer diameter dn is not greater than 200mm and is 1, 0 m; The nominal outer diameter dn is greater than 200mm for 3 and 0 m. PVC - U pipes shall not pass under the building. When necessary, reliable protective measures such as extra casing should be taken. 7, when the design without rules, PVC -u pipe shall not adopt 360 ° full package concrete of foundation treatment or enhance pipeline carrying capacity. 8, buried under the roa