加工高含硫原油装置设备及管道测厚管理规定(试行)(国外英文资料).docVIP

加工高含硫原油装置设备及管道测厚管理规定(试行)(国外英文资料) Rules for the processing of high sulfur oil installations and the thickness management of the pipes (trial) Chapter I general rule 1.1 in order to adapt to the needs of processing high sulfur crude oil, pipeline and refining unit equipment is in good condition, timely discover and eliminate the accidents caused by corrosion, and ensure safe production, stable and long period running, formulates this regulation. The equipment, the fixed point of the pipe and the regular thickness (hereinafter referred to as the thickness of the work) are an important part of the corrosion inspection of the refining plant. In the case of the overall plan of the plant corrosion examination, the company shall arrange the equipment and the thickness of the pipe. Article 1.3 enterprises shall formulate the rules for the management of equipment and pipes, and improve the institutions of supervision and accountability. Enterprise equipment (motor) is responsible for the thickness of the administrative department to manage, the corrosion resistance of full-time technical staff responsible for thickness of daily management, and thickness for the detection of unit and the use of the management of the network. 1.4 enterprises should attach importance to the measurement of equipment and pipelines, adopt new technologies and new equipments, and improve the management level of the work. 1.5 these regulations shall apply to the refining of crude oil with high sulfur steel equipment and measure of pipe wall thickness, its content in principle is also applicable to processing sour crude oil, or high sulfur crude oil with high acid value crude oil with high acid value of the steel refining equipment, pipe thickness. Chapter ii administrative responsibilities The supervisor is responsible Leading enterprise in charge of the work equipment (including technical director, who is in charge of equipment) is responsible for carrying out the stock company provisions on the ad