室内、外综合管线施工现场配合与控制(国外英文资料).docVIP

室内、外综合管线施工现场配合与控制(国外英文资料) Check the quality of materials and accessories Material: all kinds of pipe, pipe, section, cast iron pipe, cast-iron, cast-iron well cover etc., should have the material inspection certificate and the factory certificate. Accessories: the fittings used by various specialties, such as valves, instruments, and pressure regulating devices, should be given the factory certificate. The certificate shall be marked with the serial number, the name of the product, the type of specification, the date of production inspection, the serial number, the quantity of the manufacturer and the quantity. Material and accessories acceptance points In accordance with the certificate of conformity and physical examination, to confirm the conformity of the physical object, check the specifications, quantity, quality and the requirements of the national standards and design. In accordance with the certificate of conformity and physical examination, to confirm the conformity of the physical object, check the specifications, quantity, quality and the requirements of the national standards and design. Check for defects in the appearance of the product, such as touching, bruising, deforming, etc., and the rotating part of the valve is flexible and recording. All kinds of pressure gauges should be tested by legal metering units, which can be used after verification, and no unqualified products are allowed to enter the scene. The authentication certificate shall be valid after the expiration of the inspection certificate. The inspection of material shall be checked and confirmed, and it shall be tested in accordance with the regulations, and shall be approved for use only after verification. The outdoor integrated pipeline construction site will be the focal point (1) coordinate the construction of ground works The professional pipeline trench excavation, trench floor making, trench wall masonry, trench cover plate making, trench bottom ramming and backfilling etc. The