家装中室内线路配线问题 进达装饰(国外英文资料).docVIP

家装中室内线路配线问题 进达装饰(国外英文资料) Indoor wiring: The wiring of indoor circuit can be divided into bright and dark compress two kinds. Apply: wire along wall, ceiling surface, girder, house column etc. Dark compress: wire tube is embedded in the wall, floor or ceiling. In general, it is convenient to install the wiring and inspect the maintenance, but it is not very safe for people to touch the area. Dark wiring installation requirements are high, inspection and maintenance are difficult. The distribution method is general: porcelain (plastic) plywood wiring, insulator Wiring, grooved wiring, plastic sheath wiring and line pipe wiring etc. The content of this teaching is to introduce the more frequently used insulator wiring, plastic sheath wiring and line pipe wiring. Indoor electrical installation and wiring construction, should be able to transmit the electric power safely and reliably, the line layout is reasonable and beautiful, the line installation is firm. One, insulator wiring The insulator wiring is also referred to as the porcelain bottle wiring, which is a kind of wiring that USES insulators to support the conductor. The insulator is higher, the mechanical strength is big, it is suitable for the occasion which USES the big and the damp. The insulator usually has a drum insulator, which is usually used to make the wiring of the fine wire in section. There is a butterfly insulator, pin insulator and suspension insulator, and it is commonly used with a thick section of wire. /pro/241.aspx The method of wiring the insulator: (1) the positioning and positioning work is done before the soil is built. Determine the installation location of the electrical appliance, the location of the wire and the installation location of the insulator according to the construction plan. (2) line An underscore can be carried out in a powder bag or in a small piece of wood with a size on the edge. In a row a regular insulator ╳ number, fixed point spacing of the bearing capacity of the ma