宽屏,普屏面板型号及工厂模式进入方法(国外英文资料).docVIP

宽屏,普屏面板型号及工厂模式进入方法(国外英文资料) Widescreen, flat-panel model and factory mode entry method What is the factory model for the display? The factory model is a set of features that manufacturers reserve when designing circuits that are not open to regular users. The display is maintained in a special way by modifying the memory data or other means. What can the factory model do? Due to different monitor manufacturers a slightly different definition of some functions, such as a collection of some commonly used distortion, linear distortion, convergence, color pure, the accelerating voltage and so on project, when the monitor has some software failure, can use it without maintenance circuit up to solve the problem. This software failure, refers to as brightness, color, color pure, convergence, set distortion and linear distortion, position size and so on, if the users display is not bright, or shaking, or is caused by a circuit component failure, that is factory pattern problem too. What are the consequences of improper operation of the factory model? Because different factory models have different built-in functions. Some display factory models are just a little bit more than the normal function, and if its not properly adjusted it just affects the effect. But some of the manufacturers factory pattern function is quite rich, inadvertently wrong operation may produce very big effect to the display, such as the impact to the display part function and even lead to monitor not work properly. Therefore we encourage everyone to be careful when using the factory pattern, before is not clear that a certain function, it is best not to mess, we are not responsible for any consequences arising. However, due to storage in the engineering model, such as: LCD cumulative time or manufacture date, and even some important parameters, such as LCD panel types, so to buy LCD, friends into the factory pattern to check some related information and important way to verify if the LCD is new produc