怎样选择光电倍增管的型号及特性(国外英文资料).docVIP

怎样选择光电倍增管的型号及特性(国外英文资料) The choice of photoelectric double tube The type of pipe that should be chosen (using the light absorption principle) to detect the extent of light absorption through certain materials is as follows: 1. Ultraviolet/visible/near-infrared light spectrophotometer to determine the amount of sample material, continuous spectrum can be used for material scan, and use the photomultiplier tubes testing light before and after the analyte through strength, can be absorbed by the light of the test material, so as to calculate the amount of substance; Photomultiplier characteristics: wide spectrum response; High stability; Low dark current. High efficiency; Low lag effect; The better polarized light feature: R212, R374, R374, R376, R928, R955, R955, R1463, R1477, R376, R376, R6356, R6357, R6357, CR114, CR131 2. Atomic absorption spectrophotometer analysis of various elements, need special elements lamp to illuminate the combustion and separating the atomized into thick sub-state material sample to be tested, with a photomultiplier tube test the strength of the light is absorbed, you compared with pre-approved by the standard sample of photomultiplier tube features: ditto for tube type: R928, R955, CR131 3. The rotation, sugar meter rotation, sugar meter is enough material, through the photometric determination of origin, can analyze the concentration of the substance, such as content and purity of photomultiplier tube features: high stability; Low cicada current; Low lag effect; Suitable for pipe type: R142 (GDB142); R221 (GBD221). Second, use the principle of luminescence 1, light spectrophotometer samples after receiving external irradiation will shine with monochromator will display the characteristic spectral lines of light, and detecting whether there is a photomultiplier tube and its strength can be qualitative or quantitative detection of the elements in the samples; Photomultiplier characteristics: high sensitivity; High stability; Bass current;