条码扫描器选购指南(国外英文资料).docVIP

条码扫描器选购指南(国外英文资料) Barcode scanner is also commonly known as barcode scanning gun/reader, which is a scanner device that reads the information contained in a bar code. The structure of barcode scanner/barcode scanning gun is usually in the following parts: light source, receiving device, photoelectric conversion unit, decoder circuit, computer interface. Bar code scanner/barcode scanning guns basic working principle is: by light irradiation light through the optical system to the bar code above, be reflected light through the optical system imaging on the photoelectric converter, the decoder explanation for the computer can be directly to the digital signal. One, barcode scanners classified commercial barcode scanner is used mainly by CCD scanner, laser handheld scanner and full Angle laser scanner. The CCD scanner USES the principle of photoelectric coupling (CCD) to image the barcode print and then decode it. Its advantages are: no rotating shaft, motor, long service life; The price is cheap. Choosing CCD scanners, the most important thing is that two parameters: the depth of field: because of the CCD imaging principle is similar to the camera, if you want to increase the depth of field is corresponding to a lens, so that the CCD size is too big, inconvenient operation. Excellent CCD should not be able to be read by the bar code, and it is medium and comfortable. · resolution: if you want to improve the CCD resolution, you must increase the unit element of the photosensitive element of the image. A low-priced CCD is typically five pixels (pixel), read the EAN, UPC and other commercial codes are sufficient, and it will be harder for other codes to read. The CCDS are 1024pixel, and some even reach 2048pixe1, which can distinguish the narrowest unit elements from the 0.1 mm bar code. ? 2, handheld scanner is the use of laser diode as light source of single-strand scanner, it mainly include the turning mirror mirror and fibrillation two representative brand is SP400 a