汽修实习(国外英文资料).docVIP

汽修实习(国外英文资料) After nearly four months of practice at the company, my car says its not too small, but its still a lot of maintenance. Car maintenance is very important, a new car that you buy, first you need to know how to maintain. Several jobs for car maintenance: Clean car appearance, inspect door window glass, wiper, interior mirror, rear-view mirror, door lock and lift hand handle is complete and effective. Check the amount of the radiator, the amount of oil in the crankcase, the fuel oil in the tank, and the level of the electrolyte in the battery. Check the speaker, the light is complete, the installation is strong. Check to see whether the connection area of the steering mechanism is loose and the installation is firm. Check to see if the tire pressure is adequate and remove the debris between the tire and the tire. Check whether the moving clearance of the steering disc meets the criteria; Whether the hub bearing and the steering section are loose. Check for the freedom of the clutch and brake pedal. Check tire nuts, axle bolts, steel plate spring riding bolts and u bolts. After starting the engine, check if the meter is working properly and listen to the engine. Check for leakage, oil leakage, leakage, leakage and other four leakage phenomena. Check whether the drag-hang installation is reliable. The function of oil is to lubricate, cool, seal, clean, rust and protect the engine. Without oil, the cars heart would not function properly. Using mineral oil, the average 5,000km is replaced with oil. The correct oil standard is calculated by engine running time. (the estimated average speed of: km/h) x (100 hours/mineral oil - 200 hours/synthetic oil) = change in oil mileage. Five steps for car oil change: (1). The quality and viscosity levels of lubricants are used correctly. (2). Choose normal manufacturer production of high quality oil filter, prevent due to insufficient pressure filter quality problem caused by the oil duct obstruction, or poor filtering ef