硬度 刚度(国外英文资料).docVIP

硬度 刚度(国外英文资料) Common sense error! A lot of people often mistake, including many old engineers often make the mistake of metal material stiffness depends on its elastic modulus, and modulus of elasticity and mainly depends on the nature and combining with the key interatomic bonding force, composition and microstructure and heat treatment effect for it very much, so it is a performance index is not sensitive to the organisation, which is the main characteristic of elastic modulus on performance. The composition of the material and the organization will have a significant effect on the strength of the material, such as the yield strength and tensile strength, but not the stiffness of the material. From a large scale, the elastic modulus of the material is determined first by the binding. The combination of the covalent bonding material has the highest modulus of elasticity, so the composite materials such as SiC, Si3N4 ceramic and carbon fiber have high elastic modulus. The polymer, which relies mainly on molecular bonds, has the lowest modulus of elasticity due to weak bonding. Metallic bond strong bonding force, the material to plastic deformation, the modulus of elasticity is moderate, but because of the difference of various metal atomic bonding force, also can have very big difference, such as iron (steel) of the elastic modulus of 210 gpa, is three times that of aluminium (alloy) (EAl material 70 gpa), and the elastic modulus of tungsten is twice the iron (Ew material 70 gpa). The modulus of elasticity is proportional to the melting point of the material, and the more refractory the material is higher. Yk7051050 (2009-3-16 08:14:31) 18 # dry vine oh, is originally this, listen to some people said, so why do the motor output shaft and conditioning, but also has a suitable hardness value? For example, we want hrc22-26, just to increase the intensity and decrease the internal stress? Fish in spring (2009-5-26 09:14:06) Stiffness is more than the section size of th