网络层数据流程原语说明(国外英文资料).docVIP

网络层数据流程原语说明(国外英文资料) The data send part of the original text APSDE - DATA. The request ( DstAddrMode, / / destination address mode, 0x01 = 16 short addresses DstAddress, / / ASDU destination physical device address DstEndPoint, / / ASDU purpose entitys breakpoint address ProfiledId, / / the file id that the frame should be configured ClusterId, the identity of the object used in the binding operation when / / indirectly addressing SrcEndpoint, / / send the ASDU source endpoint address AsduLength, / / ASDU length bytes Asdu, / / TxOptions / / send options DiscoverRounter, / / the measures taken when routing discovery RadiusCounter / / allows broadcast frames to be broadcast on the network ) The apsde-sap service interface implements the transfer of the application protocol data unit between the peer application entities. The APS DATA request, apsde-data.request, requests a PDU (that is, ASDU) from the local NHLE to be transferred to the equivalent NHLE entity. When the local NHLE has data (PDU) that needs to be transmitted, the primitive is produced, and the data can be sent directly and encrypted. The NLDE - DATA. The request ( DstAddr, / / NSDU destination device address NsduLength, / / NSDU bytes Nsdu, the Nsdu thats going to be sent NsduHandle, / / NSDU related handles BroadcastRadius, / / allows broadcast frame transmission distances DiscoverRoute / / route discovery SeurityEnable / / information security processing ) The native application support layer generates the primitive to transfer an NSDU packet to the peer application support layer, as shown above. Local network layer data entity after receiving the primitive, for transmitting NSDU package, you will need to construct a NPDU package (network layer protocol data unit) of DstAddr value of 0 XFFFF will not overlook BroadcastMode and BrocastRadiuds these two parameters. After the NSDU package is constructed, the NSDU package will be determined for the transmission route, and the NSDU package will be sent thr