钳工技师(国外英文资料).docVIP

钳工技师(国外英文资料) To assemble the advanced technician theory knowledge test paper and the answer One, single choice (question 1 ~ 70. Choose a correct answer, and fill in the corresponding letter in brackets. The substance of professional ethics is (). A, improve the personal life B and increase the wealth of the society C, establish new socialist labor attitude D, enhance competition consciousness The violation of the safety procedures is (). To formulate the production process B and to implement safety production rules and regulations To strengthen the concept of legal system, to enforce the laws and regulations of national security production Not conforming to the cleanliness of dress and the requirement of civilized production is (). To carry out the procedures of operation B and to enforce the rules and regulations C, do not require D in the work, create good conditions of production What is wrong in the following statement is (). A, for the ribs, the spokes, and the thin wall of the machine, such as the longitudinal cut, these structures do not draw the section symbol, but use the solid line to separate it from the adjacent parts B, when the structure of the rib, spokes and holes of the parts are not in the cutting plane, the structure can be rotated to the cutting plane C, long piece (shaft, bar, shape, connecting rod, etc.) when the shape of the length direction is consistent or change according to a certain rule, the drawing can be shortened. When this method is adopted, the size may not be marked by the original length of the machine D, when the plane in the rotor part is not fully expressed in the graphic, the plane symbol (the two lines of intersecting) are used Determine the basic deviation to determine (). A, the position of the tolerance zone B, the size of the tolerance band The accuracy of C, the precision of the workpiece, the precision of the workpiece The organization of ductile iron can be (). A, ferrite + blob graphite B, ferrite and ball graphite C