6502汇编语言程序设计(2版)之程序设计part1（国外英文资料）.doc

6502汇编语言程序设计(2版)之程序设计part1（国外英文资料） The program design of the 6502 assembly language programming (2) is designed for part1 The FC technology book 2008-11-09 22:26:17 read 620 comment 1: big and small subscriptions The 6502 assembly language programming was designed to return The first section basically Outlines the second part of the instructions and the third part of the algorithm ___________________________________________________________________________________ (a) One. The CPU executes the command 6502 is normal 8-bit CPU. It needs other external devices (such as: SRAM, EPROM, timer/counter and the I/O interface devices, etc) to work, it address line 16, direct addressing capacity is 64 k (between $0000 - $FFFF). Data of 8, once completed only 8 bits of data (0-255). The CPU through the line contact to address memory unit, and then read the code of operation of the unit, by default the operation code represents the operation, the CPU on the corresponding command execution. For example, the implementation of the command ASL assumes that the program counter (PC) = $7000, ($7000) = $0 a. CPU through the program counter PC connection to the first unit at $7000, and read the unit within the operation code 0 A (corresponding to 6502 compiled help operator to ASL) and then according to the type of operation code, complete the corresponding operations, where 0 A representative of the content of the accumulator A shift to the left one. If it is A clock cycles to complete A directive, it is the first clock cycle, the CPU reads 0 A in unit at $7000, the second CPU clock cycle execute commands 0 A (shift to the left of the content of the accumulator A A, was moved to the C in the carry flag, high low was moved to 0) 2.6502 system specification $0000 - $00FF 6502 CPU zero page public area (256 bytes) $0100 - $01FF 6502 CPU public stack area (256 bytes) No data into the stack when the stack pointer S = $FF, whenever there is a data into the stack S - 1 - s. whenever there is a