PE制作（国外英文资料）.docVIP

PE制作（国外英文资料） The WinPE (Windows pre-installation environment, Windows spreinstallationenvironment), is a Win32 subsystem with fewer (but very core) services, based on the Windows xp personal kernel, which runs under protection mode. These services are for Windows installation, network sharing, automatic low-level processing, and implementation hardware validation. WinPE lets you create and format hard disk partitions and give you access to the NTFS file system partition and internal network. This pre-installation environment supports all the large storage devices powered by Windows 2000 and Windows xp, and you can easily add drivers for new devices. Using WinPE can help you convert existing ms-dos based tool to 32-bit WindowsAPIs, so that you in the standard development environment (such as Microsoft VisualStudio) is more easier to maintain the application. WinPE includes hardware diagnostics and other pre-installation tools that support standard Windows xp drivers, and you dont need to do anything special. For developers can focus on application of diagnosis, debugging and development process. So today, we are the method of making the U disk PE system. What you need: The usb boot disk tool is uFormat So 128M U and Im using an SD here The next step is to teach you how to make WINPE. 1). Run uFormat and make usb-hdd. Click on the usb flash drive (if U disk points 2 area, choose the first area), to point point here to choose the work mode, choose HDD model, then click start, according to the prompt, inserted U disk, after completed. Choose ok. At this point, you will be prompted to pop the usb stick and plug in the usb stick Once again, you can see that you are writing, and then complete the start U disk production success exit uFormat. 4) open a usb drive to view the hidden file COMMAND.COM IO. SYS MSDOS. SYS 5) there are many versions of the usb-hdd -winpe compression package that will be downloaded from the Internet. The operation is the same... Copying to the usb