传输_选择题（国外英文资料）.doc

传输_选择题（国外英文资料） Second, one-way selection The corresponding bandwidth is (B) for the low lossy and low dispersion areas of the optical fiber to be 1450-1650nm. A, 2.5 B, 25 C, 5.0 D, 50 The transmission mode in the step optical fiber is transmitted by light rays on the surface of the fibre core and the clad layer (B), but the energy is concentrated in the core. A, half reflection B, full reflection D, half refraction The index of refractive index in A multi-mode gradient index is (A). A, continuous change B, constant C, constant change D, constant At present, the loss of optical fiber at (B) nm can be about 0.2 dB/nm, the theoretical limit of near optical fiber loss. A, 1050 B, 1550 C, 2050 D, 2550 The zero dispersion coefficient of quartz fiber material is near nm. A, 127 B, 1270 C, 227 D, 2270 The normal quartz fiber can be offset by the dispersion of the waveguide dispersion and the dispersion of materials near the wavelength (A) nm, and the total dispersion of the two is zero. A, 1310 B, 2310 C, 3310 D, 4310 Non-zero dispersion-shifted single-mode fiber is also known as a (D) optical fiber, which is a new optical fiber designed and manufactured for the use of the wave division multiplexing transmission system. A, g. 652, G. 654 D, G. 655 Three, multiple choice questions According to the distribution of the refractive index of fiber optic cross section, the usual fiber can be divided into (AB). A, step fiber B, gradient optical fiber, single mode fiber, multimode optical fiber The loss of the fiber is mainly the loss of this disease, (A B C D) and the added loss. A, manufacturing loss B, connection loss C, coupling loss D, scattering loss The low-loss window used for fibre communication is (A C) and 1310nm. A, 850nm band B, 1050nm band C, 1550nm band D, and 2650nm band According to the reason of dispersion, the type of optical fiber dispersion can be divided into (A BC). A, pattern dispersion B, material dispersion C, waveguide dispersion D, polarization mode disp