安川变频器（国外英文资料）.doc

安川变频器（国外英文资料） The G7 frequency converter failure analysis and resolution of YASKAWA Japan yaskawa company G series inverter is widely used in hoisting control system, and achieved many electrical manufacturers and users of praise, Hong Kong di company in a lot of electric control system of ports are chose yaskawa inverter, early is the G5, as the promotion of the inverter, now a lot of the inverter is the G7, and already the G5 is discontinued exit the market, so this paper mainly explains the main for the G7 frequency converter, the G5 converter can be in accordance with the sample for reference. With yaskawa inverter G7 capacity is much, and will inevitably be in the process of long-term use of components ageing, peripheral equipment installation in poor contact, and the influence of work of the external environment (including temperature, humidity, dust, vibration, lightning), can cause the inverter at fault. (I serve in guangdong, guangdong summer thunder and thunder, so deep feeling, the thief hates thunder) Because before have seen a lot of people have written a similar technical documentation, ever bring myself work convenient, once again to express our heartfelt thanks to you for his predecessors, but never seen a detailed and systematic article, because I work there are days, for yaskawa also quite familiar with, so in this very want to write a more detailed documentation, for the vast number of friends to learn from each other exchange, hope to be of help, also hope you to me is not the right place to give correct criticism; Incomplete places to be replenished; It is not the best, the quickest way to improve, to achieve the goal of mutual benefit, thank you! (hehe, blow the water first) I dont say much, go to the point -- A common fault article (1) OC Over current Description: the output current of the converter exceeds the current check value. A common cause: 1, the output side of the converter is short-circuit, ground (the motor is burned, the insulation