微星AMD主板的BIOS设置详解（国外英文资料）.doc

微星AMD主板的BIOS设置详解（国外英文资料） The BIOS of the microstar AMD motherboard is detailed This setup explains, with 785GTM - E65 as the blue book, other AMD motherboard also can be referenced. The different type of AMD motherboard is only the BIOS setup project has a lot of little, as long as there is a project, set the way and the content basically the same. A, the BIOS to the main menu Standard CMOS Features Standard CMOS Advanced BIOS Features Advanced BIOS properties Integrated Peripherals integrate Peripherals Power Management H/W Monitor hardware monitoring Green Power is Green energy The BIOS Setting Password is set up The Cell Menu core Menu The m-flash drive refreshes the BIOS User Settings User Settings item Load Fail - Safe Defaults to Load the security Defaults Load Optimized Defaults Load Optimized values Save exit Setup Save Settings and Exit Exit Without Saving exits Without Saving Second, the Cell Menu core Menu Settings 1, the CPU associated Settings There are 9 CPU related Settings 1-1, CPU Specifications: this is the specs and parameters for viewing the CPU, and can be viewed at any time F4. 1 to 2, AND Cool ` n ` Quiet: AMD CPU energy saving technology, also known as Cool AND static. Change the frequency and voltage of the CPU depending on the CPU load. When the CPU is idle, the core voltage is minimized and the frequency is minimized. If the motherboard has the APS function of the microstar, turn on this option. The Settings for this option are Enabled and Disabled. 1-3, CPU CPU (MHz) : tune the CPUs front-end bus Frequency. The default frequency is the CPUs standard FSB frequency, which the user can adjust by himself. Enter the frequency values directly here, such as 220. 1-4, the CPU Ratio: Adjust the frequency of the CPU. AMDs CPU typically locks the highest frequency, reducing the frequency. The cpus with individual non-locking frequency can be adjusted to higher frequency. The default setting for the item is Auto. Hit enter and pop up the list, and th