打印机扫描仪传真机故障（国外英文资料）.doc

打印机扫描仪传真机故障（国外英文资料） The fax machine A, paperboard Card paper is a very easy problem for the fax machine, especially if you use new paper or used paper. If the paper is taken, be careful when taking the paper, only the parts that are allowed to move on the manual of the fax machine, and do not pull the lid blindly. Also, try to remove the whole piece of paper as much as possible, and be careful not to leave the broken pieces of paper in the fax machine. Two, fax or print, the paper is all white If your fax machine is a heat-sensitive fax machine, it is possible to record the wrong installation of the paper. The facsimile paper used by the heat sensitive fax machine has only one side coated with a chemical agent. Therefore, the installation is wrong and will not print any text or picture when receiving the fax. If your fax machine is an inkjet, it could be a plug in the nozzle head, please clean the inkjet head or replace the cartridge. 3, the paper appears black when fax or printing One or several black lines appear in the file that you are sending to the direction you are sending or when you are copying. If its a CCD fax machine, it could be a reflection lens dirty, if its a CIS fax machine, it could be a transparent glass. Please use the manual of the fax machine to show that you can clean the alcohol with a cotton ball or soft cloth. If there is still a problem after cleaning, please send your fax machine for inspection. Four, fax or print paper appears white line Usually this is due to a TPH or contamination. If the wire is broken, the same type of heat sensitive head should be replaced. If a dirt is available, the cotton ball is removed. Five, the paper cannot feed normally Please check the parts of the paper that are in block, the original position scan sensor failure, the clearance of the paper roller is too big. In addition, check to see if the motor is rotating, and if the motor is not rotating, the circuit and the motor involved in the motor are damaged. Th