数位板问题解决方案（国外英文资料）.doc

数位板问题解决方案（国外英文资料） How to determine whether the failure is hardware failure or software failure? When digital drawing boards are not used properly, there is usually a problem with digital arm-arm hardware itself, but more failures are caused by software. How to determine whether a failure is a hardware failure or a software failure? Here are a few simple tests: 1, the most simple and effective detection method is to get digital pull receives on another computer test, if on the other computer is normal, you can think of digital pull hardware no problem, the fault is in the driver, operating systems, applications, or other electromagnetic interference. If there is no condition for testing on other computers, it is possible to determine whether a digital arm is a problem with simple operations. A, turn the digital lever to the USB port of the computer, the digital arm indicator should be lit Place the pressure pen in the effective area of the digital arm. Press the pen tip/pen or side switch. The indicator of the digital arm will change color. If the above two points are met, there should be no problem with the digital arm-arm hardware. If you cant do the simple tests above, you can submit the tablet to the technical service center of WACOM, which will be tested for free. The pressure feeling pen always has the analysis and solution of the pressure feeling phenomenon Fault phenomenon: I had a problem with my board, but it was a long way from it. I cant use it anymore. Its so sensitive! In painter8 test, and not the same as before. Dont want to come into contact with the board before marks painted. Now its far away from the board, the appearance of a centimeter, it will record. As long as with written refers to the board (not encountered, 5 ~ 6 mm) board has reflected the. The arrow points in the screen. If written press on board is not loose. Possible causes and solutions (sorted by the proportion of occurrence) : A drivers data file has a problem, causing the driver to