消防符号（国外英文资料）.doc

消防符号（国外英文资料） Fire fighting technical documents are used in fire-fighting equipment graphic symbols GB/T 4327-93 The national bureau of technical supervision, 1993-08-19, approved the implementation of 1994-01-01 This standard is equivalent to the international standard ISO 6790-1986 {fire fighting technology document with the graphic symbol of fire fighting equipment. Subject matter and scope of application This standard specifies the basic, auxiliary and independent graphic symbols for various types of fire fighting equipment in technical documents. This standard applies to the design, construction and examination of the following fire protection works in new, reconstruction and expansion projects. A. A fixed extinguishing system symbol; C. fire supply line symbols; D. other extinguishing equipment symbols; E. Control and indicator device symbols; The symbol of the alarm starter; G. H. I escape route symbol; The symbol of the danger zone of fire and explosion. Basic principle The graphic symbols of the various types of fire protection installations are generally composed of basic symbols and auxiliary symbols to be grouped into different graphical symbols. The symbol used alone is a single symbol for use. The ratio of all graphic symbols on the same graph should be the same, and should be adjusted to the ratio of the figure. The size of the symbol should be suitable for microcopy. Basic symbol The class symbol indicates the category of fire fighting equipment. The name of the numbering symbol A portable fire extinguisher Portable fire extinguisher ISO 6790-2.1 Cart fire extinguisher Wheeled the fire extinguisher to ISO 6790-2.2 3.3 fixed fire extinguishing system (submerged) Fixed fire - extinguishing system - Total protection of a room ISO 6790-2.3 3.4 fixed fire extinguishing system (local application) Fixed fire - extinguishing system - Local application ISO 6790-2.4 Fire water supply line The Fire main ISO 6790-2.5 Other fire extinguishing equipment Miscellaneo