科美故障代码（国外英文资料）.doc

科美故障代码（国外英文资料） Copa copiers maintenance code and maintenance mode (2010-07-2510:59:41) Label: cormei maintenance data it Meiolda fault code failure name detection timing Comei digital copy machine maintenance code, maintenance mode C0000 main motor failure The # 8226; At any time after the main motor starts to run for a second, the main motor (M1) locks the signal for up to a second HIGH. C0044ADF cooling fan failure (only when installing a selection of afr-19) The # 8226; For details, please refer to the purchase section maintenance manual (afr-19). C0045 cooling fan motor failure The # 8226; When the cooling fan motor is at full speed or deceleration, the fixed motion cooling fan motor (M3) locks the signal for up to 1 second HIGH level (HIGH). C004E power cooled fan motor failure The # 8226; In the remote signal power supply cooling fan motor at ON regulated (full speed) or OFF (said to slow down regulated), power supply cooling fan motor (M4) locking signal will maintain a second consecutive HIGH level (HIGH). C0070 main plus powder motor failure The # 8226; During the rotation of the carbon flask, the carbon powder bottle in situ sensor (PC7) will output the HIGH level (HIGH) signal for 3.5 seconds in a row. The # 8226; The carbon powder bottle in situ sensor (PC7) will be continuous while the carbon flask is rotating 2 seconds output LOW (LOW) signal. C0210 image transfer voltage exception The # 8226; When the PC is still standing still, the image transfer voltage is maintained over 100 volts in the specified time. The C03FF model is improperly set. Incorrect Settings for mode Settings in maintenance mode. C0500 preheating fault The # 8226; During the preheating cycle, the surface temperature of the fixing roller is still not up to the prescribed level after the specified time period. From room temperature to 100C: 35 seconds From 100C to 140C: 25 seconds From 140C to finish the warm-up loop: 20 seconds C0500 Preheating failure (for the type with two f