BIOS刷坏后的恢复方法（国外英文资料）.doc

BIOS刷坏后的恢复方法（国外英文资料） Experts answer new motherboard BIOS, in fact, there is a certain risk, although now the motherboard manufacturer are introduced under the Windows refreshes the BIOS software, make the operation more easy and convenient, but this method than the traditional method of under DOS refresh the potential risk. Once a failure is refreshed, the problem is that the machine will not be bright, and in general it can be solved by the following method. The above image is a boot sequence for each hardware after a computer is started. The master board or the developers BIOS will be reinstated after a bad brush. Usually the new BIOS of the motherboard corrects some bugs in the old version of the BIOS and corrects some hardware and software Compatibility issues, new hardware support, and so on, so sometimes we need to refresh the BIOS. But the refresh of the motherboard BIOS is actually a risk, even though the mainboard vendors are now rolling out Windows The software that refreshes the BIOS makes the operation easier and easier, but this approach is more potentially risky than the traditional method of refreshing in DOS. Once a failure is refreshed, the problem is that the machine will not be bright, and in general it can be solved by the following method It is. 【 method 】 If you are a rookie, you can choose Replace the new BIOS chip directly. This, of course, is the most effective method is the simplest one, you can contact with agents or motherboard manufacturer, ask them for the BIOS chip, you need to use it to replace the damaged chip. Most motherboard vendors will go to users Providing BIOS chips (some are still available for free), but this approach is time-consuming and cumbersome. So its a good idea to do a lot of work on the BIOS. 【 method 】 Many first-line vendors now support BIOS files automatically when the BIOS is broken To automatically reply the BIOS, asus, msi will support this feature, download the BIOS file to U disk, brush stuck in bad mother