linux下的X Server配置快速攻略（国外英文资料）.doc

linux下的X Server配置快速攻略（国外英文资料） The X Server configuration in Linux is quickly deployed The 2004-04-23 PM The author: the author From: Linux knowledge repositories Now: /linuxtips/701.html Address: unknown Old see someone asked a question about the X Server configuration on the BBS, perhaps this is a difficult problem of installing Linux, sums up slightly, wrote the strategy, hope the X Server didnt match can have a look at the good friends, hope we wont have the latest video card can only use 320 x200 issues such as icon_smile. GIF is a preliminary introduction First clarify the concept of the X Server, due to the X Server/Client relationship and often a little different, the old have a net friend. Dont know, in a nutshell, the X Server, is responsible for receiving the keyboard mouse input and is responsible for the screen output of the program, it is the function of shielding hardware differences, to provide a device independent interface, and corresponding to the Server is the Client. There is no this concept in the MS Windows, X after adopted the structure may be affected by the point of efficiency, but it brings the benefits of network - transparent, that is to say the X Server/Client independent each other, can be in local, also can be in different places in the network, has been difficult to achieve this have MS Windows remote GUI interface functions. The article has introduced the, Linux now basically has 3 kinds of X Server, the following for its configuration method in brief about its characteristic and configuration (I recommend using AccelerateX 4.1). XFree86 If you know about your video card is very clear, can start directly, otherwise its best to use SuperProbe measure your graphics card chip, put down a little bit about the model, save trouble later. If your graphics card is new words, had better use the latest version of the current 3.3.2 rainfall distribution on 10-12 (), it is a good support for the new graphics card. XFree86 has the advantage of