RS-232串行口保护（国外英文资料）.docVIP

RS-232串行口保护（国外英文资料） For the computer to be fully protected, it must be aware of vulnerable vulnerabilities to take protective measures when designing installations. In the computer Internet network system is designed, the RS - 232 serial data line is often connected to terminals, printers, modems, and known as zero slot (zeroslot) LAN on-line. The rs-232 is a channel for disruptive noise and surge intrusion devices. The rs-232 is often the only vulnerable vulnerability in computer installations, and there is nothing that UPS and other power protection devices can do. The source of the rs-232 source is a wide variety of sources, including intersystem ground noise, phone line shock current and line failure. Intersystem ground noise is the main cause of the rs-232 data errors, rs-232 drives and mainboard damage. Intersystem ground noise is caused by the differential pressure between the interconnection ground lines (green lines). Local lines are ground to ground or a ground line is being pumped into the ground from other places and the ground pressure is low. The pressure difference is small to rf noise, large to high energy. In this paper, the reason and the consequence of the noise of intersystem ground line is T8. Surge through modem telephone line into the RS - 232, although the modem isolates RS - 232 port and telephone lines, surge could still across the block, but devastating consequences. Line failure refers to the interference of the ac power line to the rs-232 line, which is usually caused by a nearby construction site. Although this failure is uncommon, it is likely to damage every device on the rs-232 port. The RS - 232 standard The rs-232 communication standard is intended to provide the interface for computers and terminals and communication devices (modems). In this case the rs-232 communication line is short (only 1.2 meters), although the total communication line (modems and telephone lines) may be miles long. The rs-232 is used commercially to connec