断路器的基本特性（国外英文资料）.docVIP

断路器的基本特性（国外英文资料） Basic features of the circuit breaker The basic characteristics of the circuit breaker are: rated voltage Ue; Rated current In Overload protection and short circuit protection of the deduction current setting range; Rated short circuit break current (industrial circuit breaker Icu; home circuit breaker Icn). Rated working voltage (Ue) : this is the voltage that the circuit breaker works under normal (uninterrupted) conditions. The breaker also has other voltage values to deal with interference, as shown in section 4.3. Rated current (In) this is equipped with a special overcurrent tripping relay circuit breaker In the manufacturers specified ambient temperature can withstand the maximum current value, infinite will not exceed current components under specified temperature limit. For example, the rated current In = 125A will be fitted with an appropriate overcurrent tripping relay (set to 125 A) with A circuit breaker at the ambient temperature of 40C. However, if the rating is properly lowered, the circuit breaker can be used at higher ambient temperatures. In this case, the circuit breaker will be able to withstand the temperature of the 50sC at an ambient temperature limit of 109A. Therefore, it is possible to reduce the value of the circuit breaker by reducing the deduct current of the overload relay, and make corresponding changes to the circuit breaker to reduce the rating of the circuit breaker. The use of a high temperature electronic tripping device allows the circuit breaker (as described above) to work under an ambient temperature of 60C (or even 70C). Note: the circuit breaker (the IEC 60947-2 standard) is the Iu of the switching device, which is the rated continuous current. Shell bracket rating: a circuit breaker with a different current setting value, the maximum of the current tripping value of the current tripper. For example, the schneider NS630N circuit breaker can be equipped with four 150 ~ 630A electronic tripper. The circuit b