邮件管理员邮件无法收发时故障自查方法（国外英文资料）.docVIP

邮件管理员邮件无法收发时故障自查方法（国外英文资料） The mail administrator is unable to check and receive the mail Below is sina email inspection declaration, 263, and so on service providers are similar, a lot of problems we look at these covers, this document is applicable to have some knowledge of the IT system administrator, email the administrator, such as you and me The first thing to do All the tests are done on the problem server. Verify that the IP (or the entire IP segment) of the problem server is not in SBL, RBL, and CBL Make sure that the domain name is parsed and the domain name that is set on the problem server is valid for the period of validity. Mail server testing The test is done on the problem mail server. Log on to the problem mail server, use the nslookup command to view the sina domain name resolution record that needs to be tested, and find the MX record that DNS can resolve on the test side. Test using the TELNET command The items and formats that TELNET needs to be aware of The Chinese in the following brackets indicates that there is no need to enter Chinese in brackets for actual operation on the server. Please make sure that your input method is standard English, which is EN, which is displayed in English. In each line, the Spaces and symbols are not omitted, and the standard English input method must be used in half Angle. 4, every action a steps listed above, operated on the server when the need to enter a complete line of press enter after execution, after waiting for server shows the execution result, shall be for the next step. 5, if you are using a WINDOWS server, please pay attention to in the input when do not use the DELETE, Ctrl + c and Ctrl + v, Backspace key changes, if the input error, please use the exit exit Telnet, and then go back to the input, after OK results, in the next step. 6, TELNETs successful sample: Telnet 25 Helo (your domain name) Mail from: xxx@ (your domain name exists in real mail) RCPT to: xxx@ (you can use your own sina mailb