键盘显示实验（国外英文资料）.docVIP

键盘显示实验（国外英文资料） ; Note: the system board is connected to the expansion board by J2 and P2, J1 and P3 ORG 0000 h AJMP START ORG 0100 h ; / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / START: MOV SCON, # 00H The serial port works in the mode 0, RXD as output, and TXD as the pulse MOV PCON, # 00 h MOV R1, # 4 h; Clearing the post-reset mess MOV DPTR, # TAB0 KKK0: MOV. A, # 00 h MOVC A, @ A + DPTR MOV SBUF, a. The NOP. Perform an empty operation, waiting for an 8 bit to be sent The CLR SCON. 1 INC DPTR; Im going to do it with four zeros DJNZ R1, KKK0 ; / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / HH1: MOV. To output FF to P2, read back MOV P2, # 0 f0h MOV A, P2 ORL. A, # 0 fh CJNE A. Press down and move to HHH AJMP HH1; Otherwise its going to be scanned HH: MOV MOV A, P2 ORL. A, # 0 fh CJNE A. If you do have a bond, jump it to HH2 AJMP HH1; Otherwise its going to be scanned HH2: ANL A, # 0F0H MOV R0, A; R0 to save the column value MOV. Line scan MOV A, P2 ORL A, R0; The key value store R0 MOV R0, a. ; / / / / / / / / / / / / / / / keyboard scattered program - offline for row 0, column line right for column 4 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / CJNE R0, # 77 h, H1 AJMP K1 H1: CJNE R0, # 0B7H, H2 AJMP K2 H2: CJNE R0, # 0D7H, H3 AJMP K3 H3: CJNE R0, # 0E7H, H4 AJMP K4 H4: CJNE R0, # 7BH, H5 AJMP K5 H5: CJNE R0, # 0BBH, H6 AJMP K6 H6: CJNE R0, # 0DBH, H7 AJMP K7 H7: CJNE R0, # 0EBH, H8 AJMP K8 H8: CJNE R0, # 7DH, H9 AJMP K9 H9: CJNE R0, # 0BDH, H10 AJMP k10/19 dated H10: CJNE R0, # 0DDH, H11 AJMP K11 H11: CJNE R0, # 0EDH, H12 AJMP K12 H12: CJNE R0, # 7EH, H13 AJMP K13 H13: CJNE R0, # 0BEH, H14 AJMP K14 H14: CJNE R0, # 0DEH, H15 AJMP K15 H1