化验室名词解释(外国英语资料).docVIP

化验室名词解释(国外英文资料) Error: in statistical sense, a deviation from a positive value is observed. Precision: the degree to which repeated measurements are repeated under certain conditions. It is expressed in repeatability and reproducibility. Accuracy: the average value of multiple measurements is close to the true value. Truth: the actual value of an objective existence. Absolute error: the algebraic difference between the measured result and the true value. Absolute difference: the absolute value of the difference between two values. Relative error: the ratio of the measured absolute error to the true value of the measurement, multiplied by the value of 100, expressed as a percentage. Standard value: the standard physical performance or composition of the standard material that is determined and guaranteed by a particular organ or organization. Random error: the error caused by an accidental factor that is difficult to control. (also called accidental error) Deviation: the difference between the measured value and the average. Absolute deviation: the difference between individual measurements and averages. Relative deviation: the absolute deviation is relative to the percentage of the measured average. Average deviation: the ratio of the absolute value of each measurement to the number of measurements. Quality score: the mass mB of matter B and the mass m of the mixture. The symbol wB can be expressed as a percentage (%). Volume fraction: the ratio of the volume of material B to the volume of the mixture. The symbol is phi B, which is expressed as a percentage (%). 16. Inspection: the product, process or service of one or more characteristics of the measuring, inspection, test, measurement, and comparing the characteristics and the requirements of the activity. 17. Regular inspection, factory inspection or delivery) : when the product delivery must carry out the test, all products should be the rules of the factory inspection and test items. Type inspection: all techni