2011年4月自考真题机械设计基础(外国英文资料).docVIP

2011年4月自考真题机械设计基础(国外英文资料) One, single choice question: The forging of metals refers to the degree of difficulty of forging A metal material. The following materials are less forgable than [A]. A. carbon steel B. Pure metal C. Single-phase solid solution d. tissue uniform low carbon steel 2, the seam welding head type usually adopts [D]. A. connect c. connect c. connect d. connect In the following alloy, the least liquid alloy is [B]. A. cast steel b. cast steel c. copper alloy d. aluminum alloy The connection of the wall or rib of the castings shall be adopted [C] An acute Angle is connected to b. the Angle is connected to c. the circle is connected Select the blank for the following batch production: the eccentric shaft of the car should be selected, and the belt wheel should be chosen [B]. A. forgings b. castings c. welds When the cutting force applied on the workpiece is vertical and causes the machine to be less stable, the milling method is [C]. A. mill b. end mill The bending direction of the bending arc should be in the direction of the fiber direction of the slab. A. vertical b. inclined c. consistent When processing plastic material or finishing, it can choose the front Angle of [B]. A. smaller b. larger The Angle between the back and the cutting plane measured in the orthogonal plane is [B]. A. the Angle b. the Angle d. the Angle of the Angle The process of machining processes that are part of a part of a workers work in a working place is called [B]. A. installation b. process c. step d. work schedule The hardness of the wheel is [D] The degree of compactness of the abrasive wheel and the hardness of the abrasive To prevent the bending and vibration of the workpiece in case of the turning of the shaft, [D] should be minimized. A. Axial force B. Anterior Angle c. main Angle d. radial force The machining of the end surface with the cutting method is mainly applied to [A]. A. axis, sleeve, disc, ring and other parts The machine tool that should be used when