模糊系统(外国英文资料).docVIP

模糊系统(国外英文资料) Optimal capacitor switch for fuzzy load model Radial distribution system In this paper. At present, a method is proposed to solve the problem of the capacitor switch (CS) in the radial distribution system by using fuzzy variables. The CS is a critical measure of the problem of minimizing the loss of distribution systems through a optimal schedule of capacitors. Prediction of the uncertainty of load value is through the paste of trapezoidal fuzzy number to represent, the principle of fuzzy set theory, to find the right and the calculation method of fuzzy complex number at the same time also can maintain fast computing speed. Based on the linear integer programming of continuous fuzzy variables, the switching state of each switching capacitor group is optimized. The developed computer program has been examined in detail based on this method and the numerical study of the radial distribution system. 1 introduction The power system needs a significant amount of reactive power load, and the bus voltage is maintained within the specified range. Using capacitive exchange (CS) to switch the source of reactive compensation is a common method that is widely used, and in this case, only the reactive compensation capacitor is considered. The best like passive harmonic filter capacitor capacitor will not be involved in the optimization process, so the existence of the harmonic will not affect the best solution. The capacitor switch is used to determine the best bank for the capacitor because of the location of the capacitor, while also satisfying a set of equations and inequalities. It turns out to be a hybrid integer nonlinear programming problem represented by an integer variable on/off switch capacitance. Its hard to solve the mathematical model is complex, due to the large-scale practical application and the existing integer constraints, the method based on linear programming has become an advantage in this area, because of the strike can be balanced between th