【2017年整理】200MW级整体煤气化联合循环系统中燃气轮机的通流匹配特性.docVIP

200 mw level integrated gasification combined cycle gas turbine throughflow of matching features 【摘要】：Solve the problem of flow of gas turbine, determine the burning low calorific value gas turbine is the best operation condition of the syngas integrated gasification combined cycle (integrated gasification combined cycle, IGCC) is one of the important content of the system. This paper to study the level of a 200 MW IGCC plants, from the perspective of system flow adjustment scheme of three kinds of gas turbine, and analyze the plan change on gas turbine characteristic and the influence of IGCC system performance. The results showed that within a certain range reduce the compressor inlet air flow area flow or increasing the turbine, to improve burning low calorific value gas turbine characteristics of syngas and IGCC system performance. Reasonable collocation compressor extraction proportion and amount of nitrogen injection can improve the efficiency of IGCC system. Three kinds of regulation scheme is the best value, make the gas turbine and IGCC system for maximum power and maximum efficiency. The results for burning low calorific value of gas turbine syngas determination of optimum operation condition and provide reference for the design and operation of IGCC plants system. 200MW级整体煤气化联合循环系统中燃气轮机的通流匹配特性 解决燃气轮机的通流问题,确定燃用中低热值合成气燃气轮机的最佳运行工况是研究整体煤气化联合循环(integrated gasification combined cycle,IGCC)系统的重点内容之一。该文对一台200 MW级IGCC机组进行研究,从系统的角度出发提出燃气轮机通流的3种调整方案,并分析方案变化对燃气轮机特性和IGCC系统性能的影响。结果表明,在一定范围内减小压气机入口空气流量或增大透平通流面积,有利于提高燃用中低热值合成气的燃气轮机特性与IGCC系统性能。合理搭配压气机抽气比例和氮气回注量可提高IGCC的系统效率。3种调节方案都存在最佳值,使燃气轮机和IGCC系统获得最大功率与最高效率。研究结果为燃用中低热值合成气燃气轮机的最佳运行工况的确定以及IGCC电站系统的设计和运行提供参考。