16秋北交《桥梁工程(专)》在线作业1(国外英文资料).doc

16秋北交《桥梁工程(专)》在线作业1(国外英文资料) North Bridge Engineering (special) online homework 1 A RadioButtonList (a total of 10 questions, a total of 30 points.) 1. bridge building height refers to () Height A. deck and bridge the lowest edge The elevation difference between the deck and the bottom of the pier B. The height difference between the bridge and the ground line C. The elevation difference between the deck and ground based D. The correct answer: 2. in the prestressed concrete structure, prestressing concrete pressure line (produced) A. and tendons in the middle fulcrum eccentricity related The shape of B. and beam end beam reinforcement eccentric distance and beam reinforcement in the span has nothing to do C. and beam end beam reinforcement eccentric distance and beam bars in the shape of the span D. not only shape and beam end of eccentric beam reinforcement spacing and beam reinforcement in the span of, and is associated with tendons in the middle distance of the eccentric pivot The correct answer: 3. deck transverse slope should be set, to facilitate drainage. Cross slope can be set in the (general) A. on the pier B. pavement with concrete triangular cushion Plate C. Bridge D. all right The correct answer: 4. beam configuration of prestressing tendons, vertical main reinforcement, as well as various inclined bars when checking to make main () Figure A. moment B. shear diagram C. effect diagram D. envelope The correct answer: The difference between the 5. beam bridge and arch bridge in the maximum stress characteristics of the (is) A. under the vertical load, beam bridge has anti stress level, a force level arch bridge B. under the vertical load, beam bridge has anti stress level, non force level arch bridge C. under the vertical load, horizontal force free beam bridge, arch bridge has anti force level D. under the vertical load, horizontal force free beam bridge, arch bridge without force level The correct answer: The following 6. types of abutment () belongs to th