PCB抄板及原材料分析(国外英文资料).docVIP

PCB抄板及原材料分析(国外英文资料) This paper contributed by slaty. Doc document may at the WAP end of the browsing experience poor. Suggest you select TXT, or download the source file to the machine view. Analysis of the industry analyst PCB copy board and raw materials The printed circuit board (Printed circuit board, referred to as PCB) is the substrate of assembled electronic parts, the global annual output value of $45 billion, in the electronics industry after the semiconductor industry, and China growth rate far higher than the industry average rate. Now the electronic products change rapidly, the price war has changed the structure of the supply chain, Chinese both cost and market advantages. PCB industry due to cost and downstream industrial transfer, is gradually transferred to the China, in the world China is the most PCB market growth. With the development of PCB industry, PCB copy board technology more and more accurate and more advanced. The low-end PCB (4 layer) barriers to entry is relatively high, relatively full competition, concentration is low, the downstream pressure on prices, product prices often face extrusion downstream manufacturers lower prices. PCB (HDI) and high-end technology, equipment and technology requirements are very high, high barriers to entry, expansion cycle is longer, in a state of shortage in China. The rapid expansion of Chinese PCB copy board manufacturers capacity, output increasing, products to high-end development, the China PCB copy board manufacturers there is still much room for growth. CCL (CCL) and downstream products across the PCB board, the price transmission is not so direct, relatively high degree of concentration, the bargaining power is higher than PCB, but the single use leads to the dependence on PCB is very strong; due to the low-end products and special PCB material demand, lead to low cost, and specific segment size small manufacturers have living space, the integration of the industry is difficult. The scale of CCL