摄像操作(国外英文资料).doc

摄像操作(国外英文资料) Relative to the beginners, digital video camera is still a new thing, but the same digital camera filmed by different people, it must be very different, the effect of shooting back the tape will not be very satisfied, so how can we ensure the normal function of the digital video camera to play? If you have some of the following points, you will be able to use them. 1, the attention in preparation of DV is 1, the battery is full of electricity Make sure you get plenty of batteries before you use them. Electricity is the lifeblood of the camera, and power cuts mean the end of the shooting. Always keep your battery in mind during filming, and use the charger to replenish the power supply. But do not replace the battery when the camera is switched on or connect the ac power to prevent damage to the electronic device. In the case of a battery shortage, try to turn off the LCD screen, use the finder, and reduce the frequency of push and zoom. If the precious scene is lost due to a shortage of power, or cannot be completed on schedule, there will undoubtedly be great psychological damage to the creator. Prepare a video Under condition permitting, it is best to use a new video. If you are using the old belt, be sure to bring the tape to the front of the tape in advance and confirm that the protection is removed so as not to be caught off guard when using. Because the LP (record) format may appear when the late edit computer input difficult problem such as incompatible between or tape, unless as a last resort, please use SP format. The completed DV tapes should be locked in the anti-wipe state and record the tape Numbers, dates, and content tips on tape stickers. 3, preview blank lens After turning on the tape, you should pre-record 30 seconds of color bar, black field or blank lens on tape. One is to avoid recording initial walk with uneven, the signal is not stable, the second is to set aside enough time before the important content of video, for editing the e