本机MAC(国外英文资料).docVIP

本机MAC(国外英文资料) Native MAC: 00-23-54-D3-55-A4 Neighbor MAC Number one, 00-0B-6A-60-09-39 Baidu space | Baidu home page | login any shouted Jiaju immortal spirit on the home page blog album | permanent personal files | friends see article The routing table is set with the static routing table, 2007-08-30, at 18:48 As an introductory article, this article will explain static routing with a few simple examples, and finally explain a little about routing aggregation (generalization). Since this type of home and small office LAN are generally low and broadband routers, this article takes the simplest broadband router as an example. (actually, no matter what router is on the level, there is no difference in the principle of configuring the static routing, in addition to the configuration and commands Common 1WAN ports and 4LAN ports broadband routers can be considered as a simple Dual Ethernet router + a 4 small switch, whose WAN port is connected to the external network, and the LAN port is connected to the intranet to make a distinction. Routing is the act of transferring information from a source to a destination. In image, a packet is like a person who wants to go to a certain location. Routing is the process by which the person chooses the path. The routing table is like a map that marks various routes, and the packet relies on the route in the routing table to refer to the destination, and the routing entries appear to be signposts. In most broadband router, not static routing configuration, inside there is a default route, this route will LAN all export destination is not in their own LAN packets forwarded to the gateway to WAN port. The broadband router only needs to configure the simple WAN port parameters, and the host of the Intranet can access the extranet, that is, the routing is at work. This paper will be divided into two parts. The first part will explain the application of static routing, and the second part will explain the method and function of route ind