汽车发动机电控技术》考试(样卷) A卷(国外英文资料).docVIP

汽车发动机电控技术》考试(样卷) A卷(国外英文资料) Automotive engine electric control technology (sample volume) A This test is 100 minutes and 120 minutes Project one, two, three, four, five Its 30, 10, 12, 16, 32, 100 score 1, fill in the blanks (1 minute, 30 minutes) 1. The English abbreviation for electronic control fuel injection system ____________ hold, idle speed control system of abbreviations for ___________. The detonation sensor is a modified signal that is used as the _________ control. 3. The electronic control fuel injection system according to the jet way different can be divided into two types, ____________ hold and alarm. The sensor of the camshaft position is generally ___________, ____________ and photoelectric type. The driver of the injector is divided into two kinds, ___________ and ____________ 6. A/f ratio feedback control system is according to the feedback signal of ________________ adjust the fuel injection quantity of fuel injector, so as to achieve the best air-fuel ratio control. The electric gasoline injection system is composed of ______________, _____________ and control system. There are two types of throttle position sensors The purpose of the installation of oxygen sensors in the rear of the three-yuan catalytic converter is that... 10. Natural gas vehicle can be divided into three types, namely, alarm, __________________, that... There are two types of engine control for idle gas. The greatest factor that affects the conversion efficiency of TWC is that The normal fuel pressure gauging range is generally _____________________. 14. Stationary except for clean fuel injector fuel injector cleaning device, also has the function of injector __________ and __________. There are three types of car circuit diagrams that are classified as _________, __________, __________ The executor of the electronic control system of diesel engines is made up of ____________ and _____________. Second, the choice (2 points, 10 points) The reference voltage value of the