烤漆字制作工艺(国外英文资料).docVIP

烤漆字制作工艺(国外英文资料) Baking paint making process Every other paint according to the standard, there are three kinds of call 1:A: flat drum word B: pointed drum word C: round drum word, other shapes are basically evolved from these three. For example, the pointed drum can change the shape of the diamond, round drum can change arc, only the choice of tools, the depth of the next knife is different, the shape of the word is also entirely different. A: the manufacture and requirements of flat drum words: to be the words of copy paper with the description in the density board, four of the left 5cm, using hand engraving machine with the corresponding straight knife, along the outside of a word mold (internal go in line, the other to go outside). Die out, he cut flat die down. And then use the file and sandpaper the female die each side and the word angle grinding arc shape, must be smooth, uniform, finally using sandpaper. Engraving machine can also be used computer engraving mold, plus enough height, high angle, handle smooth. B: production and demand sharp drum word: the first step: the method of making the same word with the same drum, but each side of each corner and not grinding arc shape. The second step: heightening and molding. According to the width size, stroke of the word (in the most cost-effective wide, from the second layer is a middle line on both sides of the inclination is 90 degree angle, this angle to locate the heightening thickness, then choose the appropriate 45 degree angle knife is arranged in the multi-function machine, face down a sharp the drum, with 502 glue or glue in three seconds hit parts drop gradually sharp glue to make it hard for some pressing mould damage, no sharp parts of the heightening of the heightening, repair repair place, large font to buy a tool to do only manual repair, forming. C: the manufacture and requirements of drum words: the first step: the method of making the same word with the same drum, but each side of each corner and