脚手架工程标识要求(国外英文资料).docVIP

脚手架工程标识要求(国外英文资料) 4.10 scaffold engineering labeling requirements 1, scaffolding erection requirements: specifications, clean, color separation, marking. 2, building set logo card, unified size. 3, scaffolding skirting board suggested the use of two colors. The safety net must meet the requirements of the national fire protection standards and be clean, clean and tight. 4, the construction site at the bottom of the scaffold with flat bottom ramming, pole should use wooden planks or At the same time, the gutter must be provided with convenient drainage. 5 、 site scaffolding erection requirements, height work, construction safety requirements, regulations, warning signs, Scaffold test. 6, the scaffold should be equipped with a certain number of fire extinguishing equipment or equipment. 4.11 Overhanging Scaffold works The bottom of the scaffold should be tightly closed to prevent the steel pipe from dropping and wounding Net, put a template on it. The template shall be neatly sawed and shall be taken care of in the steel rope, steel pipe and other parts Leave space. The sundries on the frame should be cleaned in time. 4.12 steel unloading platform 1, I-beam unloading platform should be installed in accordance with the special program, arrange for special personnel responsible for management, fixed Period examination. 2. The tail end of the unloading platform shall be embedded with fixed round steel bars. The pull ring shall be firmly fixed with wooden sides and unloaded flat The platform should be closed and the whole closed measures should be adopted. 3 the platform shall indicate the allowable use of the load in apparent position. 4.13 site construction shelter 1, reinforcement, woodworking processing shed, mixing station, construction building entrance: double deck protection must be adopted Guards, perimeter seals, ground hardening, safety signs hung at the entrance of the building. 2, pumping machine, mortar mixing field must be set pool and drainage ditch, catch