轻松玩转电烙铁拆装普通贴片IC教程(国外英文资料).docVIP

轻松玩转电烙铁拆装普通贴片IC教程(国外英文资料) First, prepare 1 Put Take 60W and... And And the 2 Put Put 45Ws electric iron Electric iron for electric soldering iron Electric iron ( (( (1) )) Dual in line integrated circuit Dual in line integrated circuit, split dual in-line integrated circuit Dual in line integrated circuit. .. . Reverse the circuit board you want to remove Reverse the circuit board that you want to remove and reverse the circuit board you want to remove Reverse the circuit board you want to remove, ,, In all the feet of the integrated block to be disassembled All the feet of the integrated block to be disassembled are used for all the feet of the integrated block to be disassembled All the feet of the integrated block to be disassembled are filled with solder with an electric iron of 60W Soldering iron, filling the soldering iron, filling the soldering tin Full soldering tin for electric soldering iron, ,, , Then, the sharp part of the tweezers is inserted into the gap between the feet on both sides of the integrated block Then, the sharp part of the tweezers is inserted into the slot on the foot of the integrated block, and then a hand is inserted into the gap of the foot of the integrated block by the sharp part of the forceps Then, the sharp part of the tweezers is inserted into the gap between the feet on both sides of the integrated block, ,, To solder down, pull down To solder down, pull down, to solder down, pull down Solder down, pull down; ;; Another hand holding electric iron The other hand holds the electric iron, and the other holds the electric iron The other hand holds the electric iron, ,, Heated to both feet Heat the feet on both sides and heat the feet on both sides Heat the feet, ,, , Move back and forth Move back and forth; move back and forth Move back and forth, ,, When the solder is fully changed, pull it out When the solder is fully changed, the outside is pulled until the solder is fully turned When the solder is fully changed, pull it out, ,,