外置电65WH英文说明书1.docVIP

Universal High Capacity External Power System USER’S GUIDE Made in china MODEL: TP16.8V/20.5V 65WH Warning！ Safety first The following safty warnings must be observed at all times: To prevent fire and shock hazard ,do not expose the unit to rain or moisture. CAUTION:To reduce the risk of electric shock.don’t remove the cover. No user-serviceable part inside .Refer to qualified service center. Component: Battery pack B.AC Charger Connectors D.Universal Cable Part I: Connector and Connecting First,choose the proper Connector About 80% of the laptop in the marker ,the adapter plug configuration is “TIP” symbol on the universal cable to “+”symbol on the adapter plug.Polarity Setting: See following illustration: You can double check by looking for the following diagram near the power input connector on your laptop. If you see this diagram,match the “TIP” symbol on the universal cable to “－” symbol on the adapter plug. Part II:charge PIease FuIIy Discharge The Battery Before First Charge Connect the power cord of the AC charger to a wall outlet(110v-220v) Connect the DC-out plug of the AC charger to the”lN” socket of the battery pack The red indicator light of the charger on when start charge. When the indicator Turn green,means charge is completed No memory effect, the battery pack can be recharged at any time Charging Time Model Charging Time:6-7 hours Part IV :Voltage Transformer 16.8V/20.5V V(pic-6) When the switch on “L”,means LOW OUTPUT(16.8V) When the switch on”H”,means HIGH OUTPUT(20.5V) Warning : Dont’t move the switch during the Charge. Voltage apply bound: 16.8V-20.5V Part V: Usage:(pic-7) Setup the connector arrording. Set the Voltage according, Check the “+/--“again, Connect the Plug A to “Out”Jack of Battery Connect the Plug”g”to Laptop; Conplete Remark: For the 16v electrical appliance,may come with A bit noise (AC noise),swtitch the lin