差压变送器(国外英语资料).docVIP

差压变送器(国外英文资料) The differential pressure transmitter is used to prevent the medium in the pipe from entering the transmitter directly, and the pressure sensing diaphragm is connected with the transmitter by a capillary tube filled with fluid. It is used to measure liquid, gas or steam level, flow and pressure, and then change it into 4 ~ 20mA DC signal output. Differential pressure transmitter The differential pressure transmitter is suitable for the following several measuring and controlling situations: High viscosity medium at high temperature Medium that is easy to crystallize Precipitation medium with solid particles or suspended solids Strong corrosive or poisonous medium The leakage of the pressure pipe can be eliminated, and the surrounding environment can be eliminated. When the liquid is not isolated, the complicated work of the isolating liquid is often required because of the instability of the measuring signal. Continuous and accurate measurement of interface and density The remote transmitting device can avoid the mixing of the medium at different instants, so that the measurement result can truly reflect the actual situation of the process change. Clean and sanitary occasions For example, in the production of food, beverage and pharmaceutical industry, not only the transmitters are required to contact the media parts to meet the sanitary standards, but also to facilitate flushing Prevent cross contamination of different batches of media. Product features ? carry on the simulation on line operation test by stage to ensure the transmitter work stably and reliably under the extreme environment temperature, medium temperature and work pressure (including positive pressure or vacuum). Dynamic diaphragm structure is adopted, the diaphragm will not be damaged after overloading, and the accuracy will not change after long term operation. The use of full fusion welding and rigid sealing structure of the filling system, the eradication of the oil spill. A novel