水轮机检修与维护(国外英语资料).docVIP

水轮机检修与维护(国外英文资料) Rules for maintenance of water turbine Q/MXSD10301.1-2006 1, the subject content and scope of application 1.1 this standard specifies the basic parameters, structure, maintenance contents and troubleshooting of the turbine of the cascade hydropower station. 1.2, this standard applies to maintenance and maintenance of hydraulic turbine in field of Yang Yang power station. 1.3 the following personnel shall be well versed in this procedure 1.3.1 leaders: Production vice general, production department manager (director), Deputy Manager (deputy director, assistant manager), full-time technical staff. 1.3.2 production personnel: the value of long, running duty, maintenance personnel. Brief introduction of 2 water turbine structure 2.1 runner room assembly The assembly of the runner housing includes the runner chamber, base ring, and expansion joint. 2.1.1 runner chamber The runner chamber for the steel plate welded structure, easy in the range of 90 degrees the upper blade angle in the cavitation region is made of stainless steel, and with the blade surface is spherical, throat diameter of 5277mm, in order to facilitate the installation, divided into upper and lower halves fastened by a bolt together with diameter of 14 rubber seal. The runner chamber is bolted together with the outer guide water ring, sealing the legal LAN seal with a Phi 16 rubber strip. 2.1.2 base ring The base ring is provided with a telescopic joint, and the back part is welded on the tail pipe, which is the base of the expansion joint and the runner chamber, and the seat ring has a certain coaxiality and parallelism requirement. Base ring of steel plate welded structure, the installation and adjustment of the axis, the downstream end and tail pipe lining welding. The base ring bears the hydraulic vibration from the runner chamber, so it requires a solid connection with the concrete. 2.1.3 expansion joint The expansion joint is arranged between the runner chamber and foundation ring,