污水处理工程调试及试运行指导手册(国外英语资料).docVIP

污水处理工程调试及试运行指导手册(国外英文资料) Instruction manual for commissioning and trial operation of sewage treatment works (Reprinted) I. aims This manual is designed for the commissioning and commissioning of sewage treatment works, which can be used for installation, commissioning and operation personnel. It can also be used as a reference for construction and construction acceptance. Two, outline The manual contains the following main contents: Debugging conditions, preparation, testing, debugging, debugging, debugging stand-alone unit segment debugging, inoculation and domesticated, even across the board adjustment and test analysis and improvement of defects, supplement, formal trial operation, formally submitted to the self inspection, inspection and acceptance. Three, detailed rules 1, debugging conditions (1) all the civil works and structures have been completed; (2) the installation of equipment is complete; (3) electrical installation completed; (4) pipe installation completed; (5) related projects, including personnel, instruments, sewage and pipelines, have been perfect. 2 、 debugging preparation (1) to form a special group for commissioning and operation, including civil engineering, equipment, electrical, pipeline, construction personnel, and representatives of design and construction parties; (2) plan the commissioning and commissioning; (3) make corresponding material preparation, such as water (including sewage, tap water), gas (compressed air, steam), electricity, the purchase of drugs, preparation; (4) preparation of necessary drainage and pumping equipment; sandbags for betting pipes and so on; (5) detection equipment, the device must be (pH meter, test paper, COD tester, SS); (6) set up debugging records and test files. 3, test the water (water filling) way (1) to the unit filling test was carried out according to the design process order; small and medium sized engineering can use clean water or mild polluted water (water, Yu Shui); large engineering conside