王继业-毕业设计说明书.docVIP

毕业设计说明书 学生姓名： 王继业 学 号： 学 院： 交通运输与物流学院 专业年级： 2011级交通运输2班 题 目： 某车身钣金支架拉深模具结构设计 指导教师： 廖代辉 讲师 评阅教师： 　　 2015年6月5日 摘 要 冲模是汽车钣金零件成形的主要设备，随着汽车工业的发展，对钣金零件模具的设计质量及周期提出更高的要求，传统的模具设计方法难以满足要求，特别是拉深模具，其设计过程尤其繁琐、经验的依赖性更强。因此在模具工业不断发展的今天，CAD/CAE/CAM技术以其先进的制造方式，可以实现拉深模具的快速化和标准化设计。其中UG技术已经成为解决钣金件产品开发、模具设计以及产品加工等疑难点的最有效途径。 本文以钣金支架为例，采用UGUG软件环境下，建立钣金支架拉深模具的三维模型，然后对模具进行投影，并导出到AutoCAD环境中，用AutoCAD进行尺寸和粗糙度的标注，得到模具的二维工程图。本课题对于提高模具科技含量、促进CAD技术在模具设计中的应用及节约设计时间和成本有重要意义。 关键词： 钣金支架;拉深模具;UG;模具设计 The Drawing Die’s Structure Design of a Body Sheet Metal Bracket Abstract: Die is the main equipment of automotive sheet metal forming. With the development of automobile industry, this situation puts higher requirement for the design quality and cycle of the automotive sheet metal forming mold, and the traditional mold design method can not meet the requirements. Especially the drawing die, its design process is more complicated and depends much more on experience. Therefore, today in the continuous development of the die, the CAD/CAE/CAM technology with its advanced manufacturing methods can achieve rapid and standardized design for drawing die. The UG technology has become the most effective way to solve the problems of sheet metal product development, mold design, product processing and other difficulties. This task takes the example of sheet metal bracket. we analysis its structure and process, design the shape, size of the drawing process model and the overall structure of the die, elaborate the design points of the main parts and die by using the UG software. Finally, in the circumstance of UG software, we establish three-dimensional model of drawing die of the sheet metal bracket, project to the die, and export to the AutoCAD environment, using AutoCAD for the dimension and roughness of the mark, then get the two-dimensional engineering graphics of the die. This topic has gre